This type of wall bracket designed for a television depends on the floating TV console model to be placed on the shelf. The TVs have evolved over the years and are lighter and more aerodynamic than years ago. Therefore, the years of your TV will also have regard to the size of ledge that you will build. This project is rewarding for fans that have skills and basic carpentry tools.
11 Picture Gallery: Gallery Floating TV Console
Measure and cut the shelf floating TV console boards of desired length according to your plans. Use a sheet of plywood strong for the top and bottom of the shelf. Use tables 2 by 3 inches (5 to 7.5 cm) between the two plates of plywood. This gives strength to the entire shelf. If necessary use tables 2 by 4 inches (5 by 10 cm), divide them so that they are 3 inches (7.5 cm) wide.
One with nails or screws plates plywood boards 2 by 3 inches (5 to 7.5 cm) in the center of the plywood and do the same along the edges. When you insert a table of 2 by 3 inches (5 to 7.5 cm) in the center of the shelf floating TV console, you will give more support. Engages the nail heads and fill them with wood putty to harden. It also smoothest the upper and lower edges of the plywood with sandpaper. Any hole or crater filled with wood putty to harden and smooth these sectors. Paint the finished product. Shelf floating TV console mounted on the wall at the desired height using shelf brackets below the ledge. For further support, hanging a string, wire or cord from the wall to the front edge of the shelf. Clonal to the wall in the support frame.
This post topic: Tv Stands